Author Description

The “S-over” equation for the load distribution factor (LDF) was first introduced in the 1930s in the AASHTO Standard. Finite element studies, however, have shown it to be unsafe in some cases and too conservative in others. In this study, a new simplified equation that is based on the AASHTO LRFD formula and does not require an iterative procedure is developed. The new simplified equation produces LDF values that are always conservative when compared to those obtained from the finite element analyses and are generally greater than the LDF obtained using AASHTO LRFD specification. Therefore, the simplified equation provides a simple yet safe specification for LDF calculation. This study also investigates the effects of secondary elements and bridge deck cracking on the LDF of bridges. The AASHTO LRFD LDF equation was developed based on elastic finite element analysis considering only primary members, i.e., the effects of secondary elements such as lateral bracing and parapets were not considered. Meanwhile, many bridges have been identified as having significant cracking in the concrete deck. Even though deck cracking is a well-known phenomenon, the significance of pre-existing cracks on the live load distribution has not yet been assessed in the literature. First, secondary elements such as diaphragms and parapet were modeled using the finite element method, and the calculated load distribution factors were compared with the code-specified values. Second, the effects of typical deck cracking and crack types that have a major effect on load distribution were identified through a number of nonlinear finite element analyses. Transverse cracking was found to not significantly influence the transverse distribution of moment. Finally, for one of the selected bridges, both concrete cracking and secondary elements are considered to invesitigate their combined effect on lateral load distribution. The increased LDF due to deck cracking is offset by the contributions from the